| Home > Publications > Manuals > Grib API> |
| GRIB API Manual | ||||||||||
|
| Software | ||||||||||||
|
| Related Manuals | |||||
|
GRIB section 1, the product definition section
KSEC1 must be initialised when encoding; it is filled in by GRIBEX when decoding.An INTEGER array.
When section 1 contains data for ECMWF local use, KSEC1 must be dimensioned accordingly, see ECMWF local GRIB usage definitions.
| Element | Contents | GRIB API
keys |
|---|---|---|
| 1 | Version number of code table 2 (see ECMWF local code table 2). |
paramId
|
| 2 | Identification of centre (see WMO code table 0), 98 for ECMWF. | centre |
| 3 | Generating process identification number, allocated by the originating centre. (255 is used at ECMWF as an indicator for dummy surface pressure fields). See ECMWF model identifiers. | generatingProcessIdentifier |
| 4 | Grid definition. NNN catalogue number of grid used by the originating centre (See Volume B of WMO publication No.9). 255 for a non-catalogued grid, in which case the grid description follows in KSEC2. | |
| 5 | Flag showing whether sections 2 and 3 are present (see
WMO
code table 1):0, Sections 2 and 3 are omitted. |
bitmapPresent |
| 6 | Parameter indicator (see WMO code table 2). |
shortName paramId |
| 7 | Type of level indicator (see WMO code table 3), or satellite identifier. Satellite usage is as defined by INPE/CPTEC and used by ECMWF pending final definition by WMO. | typeOfLevel |
| 8 | Height, pressure, etc of level (see WMO code table 3). Single level or top of layer, or satellite spectral band. Satellite usage is as defined by INPE/CPTEC and used by ECMWF pending final definition by WMO. | level |
| 9 | Height, pressure, etc of level (see WMO code table 3). Bottom of layer if element 7 indicates a layer. |
typeOfLevel |
| 10-14 | Reference time of data. Date and time of start of averaging or accumulation. | dataDate |
| 10 | Year of century (YY). | dataDate |
| 11 | Month (MM). | |
| 12 | Day (DD). | |
| 13 | Hour (HH). | dataTime |
| 14 | Minute (MM). | |
| 15 | Time unit indicator (see WMO code table 4). | stepType = instant |
avg |
accum |
max |
min | diff |
rms |
sd | cov | ratio stepUnits = s (seconds) | m (minutes) | h (hours) | 3h | 6h | 12h | D (day) | M (month) | Y (year) | 10Y | 30Y | C (century) default value for stepUnits is "h" startStep, endStep stepRange (= "endStep" | "startStep-endStep" ) step |
| 16 | P1 - Time period (number of time units) 0 for analyses or initialised analyses. | |
| 17 | P2 - Time period (number of time units). Or time interval between successive analyses, initialised analyses or forecasts undergoing averaging or accumulation. Otherwise set to zero. | |
| 18 | Time range indicator (see WMO code table 5). | |
| 19 | Number of products included in an average, when the time range indicates an average or accumulation. Otherwise set to zero. | |
| 20 | Number of products missing from an average, when the time range indicates an average or accumulation. Otherwise set to zero. | |
| 21 | Century of reference time of data (eg 20 for 1997). | date/1000-1 |
| 22 | Sub-centre identifier. | subCentre |
| 23 | Decimal scale factor. | decimalScaleFactor decimalPrecision |
| 24 | Flag field to indicate local use in Section 1:0 No local use in section 1. |
setLocalDefinition |
| 25-36 | Reserved for WMO reserved fields. Set to 0. | |
| 37 | ECMWF local GRIB use definition identifier. This number determines the contents of elements 38-nn. See ECMWF local GRIB usage definitions. Local definition numbers 192 to 255 inclusive will not be used for ECMWF local extensions. They are free for use by Member States. |
class type stream expver ... |
Note:
For year 2000, KSEC1(21) = 20 and KSEC1(10) = 100
For year 2001, KSEC1(21) = 21 and KSEC1(10) = 1
 |
22.10.2010-->--> |
|
© ECMWF |
